Delta Rotary Flow Dividers

  • Equal flow, multi-section flow dividers.
  • Rotary flow dividers provide many useful functions from a single pump source:
    • Synchronised operation of multiple cylinders or fluid motors.
    • Proportional division of pump output among several circuits.
    • Intensified flow pressure when pressure higher than pump capacity is needed.
  • In a rotary flow divider, horsepower-in is equal to horsepower-out with very small efficiency losses. Consequently it does not generate heat. The rotary gear flow divider consists of 2 or more gear sections connected by a common shaft. Using a common inlet port, each section has its own outlet port. Because the gear sections are connected by a common shaft, the rotation speed is the same for each gear and the flow division is exactly proportional to the displacement of each of the sections.
  • Pressure intensification is a phenomenon that is inherent in all flow divider circuits. Whenever the pressure requirement in a section is greater than another section, the pressure differential between the sections will appear in the higher pressure section as an additive to the inlet pressure. For this reason a system relief valve should be used on the inlet side.
  • The gears are unrestricted in the direction they turn, therefore flow dividers can be used to combine the separate flows into a single flow which is equal to the sum of the various inputs. 

Model

Number

Sections

Disp. /Section

cc/rev

 Max. Flow Input

lpm

Max. Press.

bar

P23-60

3

11.70

119

103

P23-58

5

11.70

199

103

P23-56

7

11.70

280

103

Click here for the Delta website.

Delta Rotary Flow Dividers

DELTA FLOW DIVIDER 3 STATION

P23-60

Unit Weight: 10.8000

DELTA FLOW DIVIDER 5 STATION

P23-58

Unit Weight: 17.2000

DELTA FLOW DIVIDER 7 STATION

P23-56

Unit Weight: 23.4000