Electromagnetic & Manual Clutches / Over-hung Load Adaptors
Hyspecs have applied clutches in a variety of industries to save power and cost over time.
Hydr-App Electromagnetic & Manual Clutches
Your hydraulics don't need to be powered when not in use. An electromagnetic clutch can be switched on when you would like to make use of the hydraulics or you can switch it off and let the drive belts run the clutch without powering the hydraulic pump. A manual version of the clutch can achieve the same result via a lever operated arm.
The electromagnetic clutches come in 12 and 24-volt DC to suit group 2 or 3 standard sized pumps. There are many industries that benefit from clutches that can save you time and money. Less power is used and you save on repairs and maintenance by switching off your hydraulics when not in use.
Click here to browse and purchase our range of clutches.
Over-hung Load Adaptors
Eliminate premature motor or pump failure due to over-hung loads on the pump or motor shaft bearing.
Contamination of hydraulic fluid in harsh environments is also prevented with over-hung load adaptors. They seal out dirt and grime while providing a solid, permanent mounting surface. They also permit the easy removal of hydraulic motors for service without having to disturb the pulleys, sprockets or driver gears.
Click here for more information on our range of clutches and over-hung load adapters. Give one of our experienced sales engineers a call on 1800 497 732 or email them on hyspecs@hyspecs.com.au.